Original article

Scand J Work Environ Health 2001;27(2):125-132    pdf

https://doi.org/10.5271/sjweh.599 | Issue date: Apr 2001

Group-based measurement strategies in exposure assessment explored by bootstrapping

by Hoozemans MJM, Burdorf A, van der Beek AJ, Frings-Dresen MHW, Mathiassen SE

Objectives The precision of mean exposure to pushing was examined in 2 occupational groups using various combinations of the number of workers and measurements per worker.

Methods The frequency and duration of pushing of the 2 occupational groups was assessed using onsite observation. All data were divided into successive periods of 30 minutes of observation. The precision of the group mean exposure to pushing was expressed by 90% confidence intervals obtained by bootstrapping. The effect on the confidence interval of varying numbers of workers and numbers of periods per worker was examined.

Results For both occupational groups there was little precision to be gained when >10 workers were observed. Within the maximum number of workers used in the bootstrap simulations, it appeared that, beyond 10 workers, the confidence intervals decreased by <5% for every worker that was added, when each worker was observed at least 8 periods of 30 minutes. If workers were observed exactly 4 periods of 30 minutes per worker, an additional 4 workers were required to compensate for the loss of precision. An unbalanced strategy with approximately 8 periods of 30 minutes per worker hardly decreased the precision of the group mean, however.

Conclusions The precision of the group-based mean exposure to pushing is influenced by the number of workers observed and by the number of repeated measurements per worker. In the planning of measurement strategies, it is advisable to account for possible sources of variance in advance and to assess the exposure variability.

This article refers to the following texts of the Journal: 1997;23(4):243-256  1996;22(2):94-101  1995;21(1):15-23